Mon-Fri: 7AM-7PM, Sat: 8AM-5PM Licensed & Insured [email protected] Serving Hurst, TX

Pre-Paint Washing in Hurst, TX

Washing siding and trim before painting or staining so new paint bonds to a clean surface. Typical cost $250-$600.

Pre-Paint Washing is one of the jobs we do most often in Hurst, TX. Typical jobs cost $250-$600, and you approve the price before we begin.

Method and pressure

Soft wash or low-pressure washCleaning method

Is it time for pre-paint washing?

  • You're about to paint or stain the house
  • Chalky residue comes off on your hand
  • Mildew or dirt under the old paint

Where the grime comes from

  • Paint chalking as it ages
  • Mildew that will grow through new paint if not killed
  • Dirt that weakens adhesion

Easy upkeep between cleanings

  • Ask your painter what prep they need
  • Allow siding to dry for the time the paint maker recommends before painting

Not sure what you're looking at? The free stain identifier and safe pressure guide explain each stain and surface.

What can go wrong with DIY pressure washing

  • Painting over mildew, which bleeds through
  • Too much pressure that damages wood or drives water into the wall
  • Painting before the wood is dry

What happens on the day

  1. Coordinate with your painter
  2. Protect plants and fixtures
  3. Kill mildew and wash the surface
  4. Remove loose chalk and dirt
  5. Leave the house to dry before painting

Typical pre-paint washing prices

$250-$600Typical range for a typical home exterior
2-4 hours plus dry timeTypical time on site
Before every exterior paint jobRecommended frequency

What moves the price:

  • Size: square footage of siding, roof or flatwork
  • Condition: heavy growth, old stains and peeling finishes take longer
  • Access: number of stories, roof pitch, slopes and how close we can park
  • Add-ons: sealing, gutter brightening and other services done in the same trip

These are typical U.S. ranges, not a quote. You get an exact price before any work starts. For a quick estimate, try the pressure washing cost calculator.

Pre-Paint Washing in Hurst, TX

Mildew and algae are the main reason Texas homeowners wash their siding. Shaded walls can turn green within months, and pressure alone doesn't kill the growth, so we use a soft wash solution that does.

Parts of Texas are exposed to hurricanes and tropical storms. After a storm, washing removes mud, debris and salt spray from siding, screens and walkways. Check for damage first: loose siding, broken screens and roof damage need repair before anyone washes them.

Near the coast, salt air leaves a film on siding, windows, screens and railings that dulls finishes and speeds up corrosion on metal. Regular rinsing and washing help protect them.

Much of Texas has hard water. Sprinklers and misters leave white mineral spots on walls, windows, fences and pool tile, and those spots need a mineral-safe cleaner, not more pressure.

Some cities in Texas limit outdoor water use, including washing hard surfaces with a hose, especially during drought declarations. Pressure washers use far less water than an open garden hose, but rules vary, so it's worth checking your city's current restrictions. Wash water should also be kept out of storm drains.

We provide pre-paint washing across Hurst (ZIP codes 76053 and 76054) and nearby towns including Bedford (2.1 mi), Richland Hills (3.4 mi), North Richland Hills (3.5 mi) and Colleyville (4.1 mi). Call (877) 658-5887 for a free quote in Hurst.

Pre-Paint Washing: frequently asked questions

How much does pre-paint washing cost in Hurst, TX?

Pre-Paint Washing typically costs $250-$600 for a typical home exterior, and usually takes 2-4 hours plus dry time. The exact price depends on the size and condition, and you get it before any work starts. Call (877) 658-5887 for a free quote.

Do you use high pressure for pre-paint washing?

Pre-Paint Washing is done with soft wash or low-pressure wash. Low pressure and the right solution remove growth and dirt without damaging the surface, and the growth takes longer to come back.

Is pre-paint washing safe for my plants and pets?

We pre-wet plants and lawns, keep cleaning solutions diluted to what the surface needs, and rinse landscaping again when we finish. Keep pets and children inside until surfaces are rinsed and dry.

How often should I schedule pre-paint washing?

Before every exterior paint job. Shade, nearby trees, humidity and heavy traffic mean more frequent cleaning; sunny, dry spots can go longer. Our free cleaning frequency tool gives a recommendation for your climate.

What if it rains on the day?

Light rain doesn't stop most washing, but heavy rain, high wind, lightning and freezing temperatures do. If the weather isn't right, we reschedule at no charge. Our work is backed by a satisfaction guarantee.

More services

Popular Exterior Cleaning Services in Hurst, TX

Deck Cleaning for Composite Decking

Low-pressure wash. Composite decking doesn't need staining, but it does grow mold and mildew, especially in shade and between boards.

Typical $250-$600

Rust Stain Removal for Brick

Low-pressure wash. Brick is tough, but the mortar joints are softer than the brick itself, and older soft-fired brick can pit.

Typical $150-$500

Paver Cleaning & Sealing

Paver cleaning, re-sanding with polymeric sand and sealing to lock joints, deter weeds and bring back color.

Typical $600-$1,800

Graffiti Removal for Concrete

Pressure wash with a surface cleaner. Plain broom-finish concrete is the surface pressure washing is made for.

Typical $200-$800

Patio Cleaning for Flagstone

Low-to-moderate pressure wash. Flagstone covers several stones, including sandstone, slate, bluestone and limestone, and they react differently to pressure and chemicals.

Typical $150-$400

Stucco Cleaning

Stucco and EIFS soft washing that removes green and black growth, dirt and rust stains without damaging the finish.

Typical $300-$800

House Washing for Wood Siding

Soft wash. Painted and stained wood siding grows mildew and loses its finish faster on the shaded and weather-facing sides.

Typical $300-$700

Exterior Mold & Mildew Removal for Fiber Cement Siding

Soft wash. Fiber cement siding is durable and holds paint well, but its factory finish can be marked by high pressure, and manufacturers' care guides generally recommend low-pressure cleaning.

Typical $250-$700

Gum Removal for Concrete

Pressure wash with a surface cleaner. Plain broom-finish concrete is the surface pressure washing is made for.

Typical $200-$1,000

Garage Floor Cleaning

Garage floor degreasing and pressure washing to lift oil, tire marks and road salt residue.

Typical $100-$300

HOA & Apartment Pressure Washing for Brick

Low-pressure wash. Brick is tough, but the mortar joints are softer than the brick itself, and older soft-fired brick can pit.

Typical $800-$5,000

Deck Cleaning for Pressure-Treated Wood

Low-pressure wash. Pressure-treated pine is the most common deck and fence wood.

Typical $250-$600

Ready for a cleaner home or business?

Get a free pressure washing quote in Hurst, TX. Tell us what needs cleaning and we'll give you a price and the next available date.

Call NowFree Quote